รหัส12009 DRIVER 2H504 4.2A

Step motor driver 2H504

Specifications

Cooling	Natural Cooling or Forced Convection
Environment	Space	Avoid dust, oil frost and corrosive gases
	Ambient Temperature	0°C－50°C
	Humidity	40 －80%RH
	Vibration	5.9m/s2 Max
Storage Temp.	-10°C －80°C
Weight	Approx. 260 gram

Dimensions
Dimensions in mm

Current Setting

Microstep Setting

* SW4: ON=Full current, SW4 : OFF=Half current
P1 Pin Assignment

Signal	Function and Descriptions
PLS+	Pulse or Step Input TTL differential input with high-going pulse, 1 μs min width. For +5V or +24V operation, a current limiting resistor had to be pull up or connected in series from the PLS+ to the VCC.
PLS-
DIR+	Direction Input Logic High = positive (CW) rotation—4.0 ~ 5.0V Logic Low = negative (CCW) rotation—0 ~ 0.5V The DIR signal must be stable for at least 5ms before the drive receives the first pulse.
DIR-
ENA+	Enable Input Logic High = Drive Enabled Logic Low = Drive Disabled This input, if left unconnected, is regconised as Logic High by the drive, and it will be enabled.
ENA-

Pin Assignment

Wirings

R=0 if VCC=5V
R=1K(Power>0.125W) if VCC=12V;
R=2K(Power>0.125W) if VCC=24V;
R must be connected to control signal terminal.

ราคา 3,000 บาท
ราคานี้เป็นราคาไม่รวม Vat 7%

Price 3,000 Baht
This price does not include 7% Vat